Product Finder

Search for bet体育直播 products by bet体育直播 market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business!

Reset
15mm Position Sensor/ Potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and 聽multi-purpose Control applications such as:

  • Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
  • Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
  • Timer & Function/Programme Select for Washing 聽Machines, Dishwashers and all White Goods in general.
  • Size and Position detectors.
Standard Features:
  • Conceived and designed for easy customisation.
  • SMD or Through-hole Mount.
  • Endless Rotation (360潞).
  • Wide Electrical Angle (340潞 +/-10潞).
  • Extended Mechanical Life (100k cycles).
  • Working Temperature Range: -40潞C to +120潞C.
  • Low Profile.
  • Linearity聽3%.聽
  • Embossed Tape or Bulk packaging.
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.

360潞 rotary position sensor.

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
  • Electrical angle: 360潞
  • Designed for direct input to microprocessor.
  • SMD, Horizontal or Through-hole Mount
  • Endless Rotation
  • Extended Mechanical Life
  • Working Temperature Range (-40潞C to +120潞C)
  • Low Profile (4.4 mm)
  • Linearity (independent): 卤2%
  • Embossed Tape or Bulk packaging
  • Reflow Soldering capability
  • Plug-in shafts
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • Ideal for Consumer Control and position sensing applications
  • IP54 protection according to IEC 60529

Aluminum Busbar - Power Distribution

Custom designed power conductor made from aluminum to reduce weight and cost聽

Benefits

  • Approximately a 20% cost reduction relative to copper
    • Cost stability
  • Approximately 50% lighter than copper (includes the extra volume)

Features

  • Variety of plating options available
  • Can be designed to replace a copper busbar considering thermal & physical properties
  • Powder coating for safety
  • Single or multi-layer laminated聽
Copper Busbar - Power Distribution

Custom designed power conductor made from copper聽

Benefits

  • Space saving relative to aluminum 聽
  • Efficient thermal and electrical properties
  • Lower Insulation Resistance (IR) drop

Features

  • Industry standard material (commonly used/accepted)
  • Versatile connection and configuration options
  • Variety of plating options available
  • Powder coating for safety
  • Single or multi-layer laminated
Customised value added position sensors.

One of our core competences has always been the high experience in manufacturing custom sensors and controls according to customers麓 requirements, coping with even the hasher environments麓 conditions using rotary, linear and multiturn contact and non-contact technologies.

The pursuit of the most cost-effective total custom-engineered Sensors Solution for your needs is firmly embedded in our business philosophy, whatever your requirements may be, from adapting standard products to complete new designs. Rapid prototyping, low batches accepted, up to 360潞 measuring range, analog, PWM, SPI, switch outputs are some of the key features offered by Piher. We offer accurate and reliable 360掳 non-contact angular position sensing.

DCM-PT15 detented potentiometer.

The combination of the well-known PT15/PTC15/PS15 control potentiometers with a Detent Control Mechanism (DCM) affords the appliance designer the possibility to solder the potentiometer onto the Control PCB assembly and then, in a second operation, assemble the DCM over it. This removes the need to build Detents into the User front panel of the appliance, simplifying, and significantly reducing the total cost of the solution.

The detent torque can be modified according to Customer requirements (depending on the input dial鈥檚 diameter, etc) as can the number and position of the detents.

Features
  • High & low torque detents can be freely mixed
  • Cut track option (initial / final)
  • Detents configurable to specific positions in complex tapers.
  • Designed for PT15V or PS15 (SMD)
  • Wiper positioned at 50% or fully clockwise
  • Resistive track dust proof enclosed
  • Up to 16 high torque detents
  • Also upon request:

聽 聽Self extinguishable plastic UL 94V-0
聽 聽Wiper positioned at 50% or fully clockwise
聽 聽Special Tapers
聽 聽Crimped terminals

Consumer electronics potentiometer.

Fully customiseable detented potentiometer that features:

  • detents (or no detents)
  • end stops
  • plastic / metal shafts
  • "plug-and-play" connectors
  • "push to turn" function
  • availability as switch, encoder or potentiometer
Main features

Endless Rotation (360潞)
Wide Electrical Angle (340潞 卤 10潞)
Extended Mechanical Life (25.000 cycles)
Laser trimming upon request
Resistance values*:聽 10k (potentiometer version)
Standard detents number*:聽 4, 2
Detent torque*:聽聽 900 to 1500 gf.cm
Tolerance:聽 卤 30%
Nominal Power: 0.15 W @ 50潞C
Linearity (absolute):聽聽 卤 5% (standard)
Taper: Linear (potentiometer version)
Life*:聽 25,000 cycles
Temperature Range:聽聽 聽聽聽 聽-40潞C to +120潞C
Mechanical Angle:聽 360潞
Electrical Angle:聽 280潞 卤 10潞
Rotational Torque:聽 鈮 50 mN.m
Max. Voltage:聽聽 聽聽聽 聽38 VDC

(*) Others upon request

15mm low profile incremental encoder.

The extended temperature range (-40潞C to +120潞C) allows this encoder to be employed in extreme environmental applications where other encoders currently on the market can not be used. This in combination with optional SMD or through-hole mounting makes the E-15 series ideal for automotive heating, ventilation & air conditioning, oven & microwave (white and brown goods in general), kitchen appliance and power tools.

Main features
  • 3 or 6 pulses per revolution (standard).
  • SMD or Through-hole Mount.
  • Working Temperature Range (-40潞C to +120潞C).
  • Low Profile (4.4 mm).
  • Embossed Tape (SMD) or Bulk packaging (Through hole).
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.

Air Quality Gas Sensor

SGX has a proprietary MOS technology utilizing state of the art MEMS technology, combining a specialized nano-particle sensing layer with a patented poly-silicon heater. This unique design creates a highly sensitive and responsive semiconductor sensor, manufactured on an automotive production line for outstanding quality and performance. These sensors are easily capable to detect and measure combustible and pollution gasses in parts per billion (PPB) and are suitable for many environmental, automotive and industrial applications worldwide.

Main features of these sensors offer:

  • Low power
  • Parts per billion detection range
  • Available in SMD packages
  • High resistance to shocks and vibrations
  • Miniature dimensions
  • Long life expectancy

External SAS

High Speed Cables

Flat Cable

LF Cable Assemblies

Flexible Busbar - Power Distribution

Flexible busbars are composed of聽several thin layers of copper or aluminum and are聽designed to efficiently distribute power across an AC or DC system.聽bet体育直播 power distribution busbars are an excellent replacement for power harness applications.

Benefits

  • Ideal for thermal expansion environments
  • Effective for tolerance mismatch applications
  • Ideal for shock and vibration environments

Features

  • Single Potential (PWR or RTN)
  • Made of multiple thin sheets of copper or aluminum
  • Welded ends
  • Shrink tubing available
Flexible Polyimide Heaters

Polyimide flexible heaters provide excellent heat transfer to localized areas with a quick ramp and consistent hold of temperature. 聽Applications include, but are not limited to ; medical lab equipment, respiratory equipment, frost protection, fluid warming, instrumentation, and fiber optic devices. 聽The heaters can be turned on and off at specific temperatures as required.聽

Flexible Printed Circuit Assemblies

bet体育直播 Sincere is a one stop shop for value added flexible circuits. 聽We will work with your engineering team from the inception of the design through full turn-key tested circuit assemblies. 聽Our services include design and聽gerber creation, DFM reviews, full in-house assembly, and testing of final product.

  • SMT and Manual Assembly
  • Wave Soldering
  • 聽Circuit Finishing including structural adhesives, epoxies, conformal coating, PSA adhesive, and Poron patches
  • Passive and Active Component Testing
Flexible and Rigid-Flex Printed Circuits

bet体育直播 Sincere provides high quality flexible printed circuit solutions for multiple markets including, but not limited to the 聽Industrial, Medical, Instrumentation, and Automotive markets聽. 聽By utilizing a聽manufacturing center of excellence in a low cost region, we offer the customer a great value at a low cost. 聽Our products include:

  • Single Sided Flex - Type I
  • Double Sided Flex - Type II
  • Multilayer Flex - Type III
  • Rigid-Flex - Type IV
Thermometrics Harsh Environment Chip Thermistor CR-1

The聽CR-1聽Harsh聽Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for聽harsh environment applications and high volume assembly.

By bet体育直播 Advanced Sensors | Thermometrics, Inc.

Features:

  • AEC Q200 Rev D Qualified
  • Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications
  • Operation up to 190掳C with excellent stability
  • Small body diameter
  • Fast response
  • High thermal shock resistance
  • Automotive/Aerospace fluids resistance
  • Water immersion
  • Flexible 鈥 coated leads can be formed
  • Insulation resistance to 1kV d.c.
  • Designed for accurate temperature measurement, control & compensation
  • Tight tolerances on resistance and B value
  • Available on bandolier to IEC 286-2RoHS 2011/65/EC / REACH compliant
Thermometrics CL Series of聽Inrush聽Current Limiting Thermistors

Thermometrics CL Series of聽Inrush聽Current Limiting Thermistors consist of a disc thermistor with uninsulated lead-wires, and are used to control聽inrush聽current when switching power supplies. The main purpose of limiting聽inrush聽current is to prevent components in series with the input to the DC/DC convertor from being damaged. Typically,聽inrush聽protection prevents nuisance blowing of fuses or breakers as well as welding of switch contacts.

By bet体育直播 Advanced Sensors | Thermometrics, Inc.

Features:

  • Low cost, solid state device for聽inrush聽current suppression
  • Excellent mechanical strength
  • Wide operating temperature range: -58掳F to 347掳F (-50掳C to 175掳C)
  • Suitable for PCB mounting
  • Available as a standard with kinked or straight leads and on tape and reel to EIS RS-468A for automatic insertion
  • Low steady resistance and accompanying power loss
  • Small size
  • Low cost solid state sensor
MSC-360 Miniature Hall-effect Rotary Position Sensor

Absolute rotary sensor that provides a perfect fit for preferential use in space constraint applications.

Despite its lightweight and miniature size of only 21mm., this hall effect sensor delivers high performance with up to 360潞 electrical angle (without dead zone), 12bit resolution, extended life and EMS, EMI, and ESD protection.

The MSC-360 can easily be tailored to customers' needs providing value at the lowest cost even for the most demanding environments.

Main features
  • 聽聽聽 Simple & Robust magnetic compact design
  • 聽聽聽 Endless rotation
  • 聽聽聽 Up to 360潞 of electrical angle
  • 聽聽聽 Magnetic shielding (models without shielding are available for better cost-effectiveness)
  • 聽聽聽 Programmable linear transfer characteristics (positive slopes & negative slopes can be programmed)
  • 聽聽聽 Self-diagnostic features
  • 聽聽聽 Over voltage protection and reverse voltage protection
  • 聽聽聽 Analog and PWM output聽 聽
  • 聽聽聽 Simple or redundant output
Target applications
  • 聽聽聽 Non-Contacting long life angle/position sensor.
  • 聽聽聽 Absolute rotary position sensor
  • 聽聽聽 Pedal position sensor.
  • 聽聽聽 Throttle/EGR valve and gear position sensor.
  • 聽聽聽 Height & suspension sensor.
  • 聽聽聽 Non-contacting potentiometer.
  • 聽聽聽 Float-level sensor.
  • 聽聽聽 Joysticks and hand controls.
  • 聽聽聽 Robotics, material handling, industrial equipment, HVAC monitoring & control, etc.

聽聽聽聽聽聽聽聽聽聽聽聽聽聽

Hall Effect non contact sensor.

Designed with the sensor directly mounted onto a PCB, the innovative MTS-360 Sensor/PCB Combo package allows engineers to easily mount a fully featured rotary sensor without first having to design a printed circuit board for the sensor. The result is time-savings and convenience.

The MTS-360 Sensor/PCB assembly is available with or without 2.54 mm pitch connector, both easily secured with standard M3 screws.聽 The entire assembly measures just 35mm wide by 36mm long, allowing for applications with tight packaging constraints. 聽

The new MTS-360PCB Mechanical Mount sensor model incorporates all the breakthrough sensor technology performance features of the original MTS-360 by merging a through-shaft design with 360潞 absolute position feedback in a small size package.聽 The result is an extremely small fully featured rotary sensor with reliability up to 50 million cycles.聽聽 The MTS-360 relies on patented Hall effect technology to enable true non-contacting through-hole shaft sensing now using a simple three eared mounting. The standard model features a 4mm double D-flat through-hole and (3) slotted mounting holes allowing final rotational adjustment at assembly.

Ultra Miniature SMD Rotary Sensor

The MTS360 provides a true breakthrough in contactless sensor technology by combining a through-shaft design with 360潞 absolute position feedback in an ultra miniature size. The result is the smallest fully featured rotary sensor on the market with reliability up to 25 million cycles.

The MTS 360 relies on patented Hall effect technology to enable for the first time true non-contacting through-hole shaft sensing using standard SMD features.聽

The聽device offers electrical angles up to 360掳 with no dead band and linearity as low as 卤0.5%. Rated for use at -40潞C to +150潞C, the sensor can operate up to 300 rpms and can be programmed with full scale output with angles shorter than 360 degrees. Output is selectable between Analog, PWM 12 bits or Serial Protocol (SPI) at 14 bits and includes a second output channel to provide a programmable switch signal. A redundant version with a dual core sensor in the same package is also available.

6mm carbon potentiometer.

6mm low cost carbon potentiometer. For long life and lead free reflow soldering please use the product .

Standard features:
  • RoHS compliant materials.
  • Carbon resistive element.
  • Plastic substrate.
  • Over-moulding manufacturing technique.
  • SMD or through hole.
  • Embossed Tape (for SMD), tape on reel, ammopack and magazine packaging for automatic insertion and bulk for manual assembly.
  • Both sides cross slot easy adjustment.
  • Accidental rotor movement protected.
  • Traceability insured through date code marking.
  • Assembly method: stand up and lay down.

Miniature potentiometer.

The N6R聽is a unique, fully RoHS ready miniture potentiometer with all the features of the traditional full size types. The combination of the 10k mechanical life, reduced form factor, RoHS reflow compatibility and overmoulding technology provides market leading performance in a compact, robust design.聽

The N6R Long Life "E" version has been conceived for the appliance and automotive industries to provide a cost effective solution. Further options include improved linearity, a 360潞 endless rotation option and a selection of shafts and knobs. Ask for double reflow potentiometers and geared potentiometers here.

Linear position sensor

Features:聽

  • 聽High reliability.
  • 聽Simple construction (only 3 component parts).
  • 聽Over-moulding manufacturing technique.
  • 聽Plastic or metal clip versions available.
  • 聽Various fixation means: clip type聽(inward/outward actuating), locating pins,...

Provides a low cost, highly reliable solution for all position sensing applications: automotive seat position memory, central locking, headlamp position and rear-view mirror position sensors.

NTC Thermistors - Epoxy Type | Thermometrics

Epoxy-coated thermistors are generally used at temperatures below 150掳C. Choose from our extensive range of resistances and beta values.

Thermometrics offer two types of Thermistors:

  1. Interchangeable Thermistors

  2. Type RL Epoxy Thermistors

Type/Series

Applications

Description

Thermometrics - NTC Type CR-1 Harsh Environment Chip Thermistor

"Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications"

"NTC Type CR-1 harsh environment chip thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating."

Thermometrics - NTC Interchangeable Type 95 Series Thermometrics Thermistors

"Suitable for temperature measurement, control and compensation"

"Epoxy-coated, NTC interchangeable thermistor chips with bare tinned-copper lead wires. Type DC95, Type EC95, Type TK95"

Thermometrics - NTC Interchangeable Type 65 Series Thermometrics Thermistors

"Suitable for temperature measurement, control and compensation"

"Epoxy-coated interchangeable chip thermistors with heavy isomid insulated nickel lead-wires. Type MC65, MF65"

Thermometrics - NTC Interchangeable Type SC Series Thermometrics Thermistors

Ideal for medical applications

Sleeved interchangeable chip thermistors with heavy isomid insulated Copper lead-wires. Type SC30, Type SC50

Thermometrics - NTC Epoxy Chip Series - Thermistors

"Suitable for temperature measurement, control and compensation"

"Low cost, solid state epoxy-coated temperature sensors"

Thermometrics - NTC Epoxy Type C100 Series - Thermistors

"Suitable for temperature measurement, control and compensation"

"Type C100: Epoxy-coated chip thermistor with bare tinned-copper lead-wires."

Thermometrics - NTC Epoxy Type MS Series - Thermistors

"Suitable for PCB and probe mountings"

"Type MS: Epoxy-coated point-matched disc thermistors with nickel PTFE insulated lead-wires."

Thermometrics - NTC Epoxy Type NDK Series - Thermistors

"Suitable for automotive, HVAC and white goods applications"

"Type NDK: range of epoxy-coated chips bare 0.007 in (0.2 mm) tinned monel lead-wires."

Thermometrics - NTC Epoxy Type NDL Series - Thermistors

"Suitable for automotive, HVAC and white goods applications"

"Type NDL: range of epoxy-coated chips with bare 0.0098 in (0.25 mm) tinned monel lead-wires."

Thermometrics - NTC Epoxy Type NDM Series - Thermistors

"Suitable for automotive, HVAC and white goods applications"

"Type NDM: range of epoxy-coated chips with bare 0.007 in (0.2 mm) tinned-copper lead-wires."

Thermometrics - NTC Epoxy Type NDP Series - Thermistors

"Suitable for automotive, HVAC and white goods applications"

"Type NDP: range of epoxy-coated chips with insulated 0.0078 in (0.25 mm) monel lead-wires."

Thermometrics - NTC Epoxy Type NK Series - Thermistors

"Suitable for automotive, HVAC and white goods applications"

"Type NK: range of NTC chip thermistors with solder-coated steel wires and epoxy resin coating."

NTC Thermistors - Glass-Encapsulated Diode Series | Thermometrics

Thermometrics聽Diode聽Series of Glass-Encapsulated NTC Thermistors consists of a聽range of NTC chip thermistors in DO-35 style聽glass package (diode聽outline) with axial solder-coated聽copper-clad steel wires.聽Glass聽body provides hermetic seal and聽voltage insulation and excellent stability. Designed for accurate temperature聽measurement, control and compensation in various applications, including automotive, telecom, HVAC and white goods. Also for use in temperature sensing for household appliances, such as rice cookers, electronic ranges and ovens, and industrial products, such as pharmaceuticals, chemicals, and components.

Features:

  • DO-35 style glass package (diode聽outline) with axial solder-coated copper-clad steel wires
  • Designed for accurate temperature measurement, control and compensation
  • Tight tolerances on resistance and B value
  • Operation up to 482掳F (250掳C) with excellent stability
  • Glass body provides hermetic seal and voltage insulation and excellent stability
  • Designed for cost effective solid state sensor
  • Resistant to corrosive atmospheres and harsh environments
  • Lead wires metallurgically bonded to thermistor element for improved reliability (Type GE only)
  • Available on axial bandolier to IEC-286-1/EIA-468A and packet taped to EIA RS-481 for MELF
  • Also available loose-packed with axial, radial and SMD wire forms

By bet体育直播 Advanced Sensors | Thermometrics, Inc.

NTC Thermistors - Radial Lead | Thermometrics

Thermometrics offers point-matched Radial Lead Disc Thermistors with bare lead wires聽in a wide range of material systems.

NTC Thermistors- Radial lead Applications Description
Thermometrics -Uncoated Disc Radial Leads NTC Thermistor Type RL10 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL14 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL20 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL30 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL35/40/45 "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type SA "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" Interchangeable thermistor with bare lead-wires.

By bet体育直播 Advanced Sensors | Thermometrics, Inc.

Outside Air Temperature Sensor (OAT)

Thermometrics Outside Air Temperature Sensor (OAT) measures the temperature outside of a vehicle's passenger compartment. It relays the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the interior temperature of the vehicle. The sensor also provides the vehicle occupants with temperature readings from outside the car. This information is particularly useful when driving under near-freezing or freezing conditions. The sensor is usually mounted inside or near the front bumper or in the side mirror.聽

Features:

  • Low price
  • High sensitivity
  • Wide application range
  • Compact design
  • Integral sealed connector
  • Small size
  • Single hand installation with no tools
  • Alternate RvT curves available
  • Different geometries to meet package requirements
  • Other resistance and beta values available

By bet体育直播 Advanced Sensors | Thermometrics, Inc.

16mm panel potentiometer.

16mm potentiometers enclosed in plastic housing with a shaft and聽IP54 ingress protection rating.

Main features

Modular gang type (up to 4).
Self extinguishable material UL 94-V0.
Bushless model.
Nut & washer.
Switch.
Stereo matching.
Metalic support.
IP54 protection according to IEC 60529.
Polyester substrate.
Carbon resistive element.

These provide full customisation capabilities, such as:

  • Electrical and mechanical specifications.
  • Custom mechanical life.
  • Special outputs (linear, log, anti-log, bespoke).
  • Absolute or independent linearity values.
  • Special resistance value and tolerance.
  • Mechanical and electrical angles.
  • Switch.
  • Selectable busing and shafts lenghts and shapes.

Potentiometers with detents

This product family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 6, 10 & 15 mm potentiometer series thus allowing a high range of configurations: special tapers, tolerances, linearity, cut track, etc.

This detent design not only adds a "click" sensation of position, but also offers enormous savings in both cost and space for any given application.

Strong and weak detents can be mixed as per cutomer麓s request.

- Replacement for:
聽聽 聽鈥 Existing customer detent mechanisms.
聽聽 聽鈥 聽Multi-pole switches.
聽聽 聽鈥 聽3 or 4-bit absolute encoders (connecting to microprocessor analogue input).
- Analogue signal presets.
- Temperature control settings.
- Relay Timers.

PT麓s with detents also lend themselves perfectly to industrial and domestic power tool applications where the detents prevent accidental movement of the potentiometer under vibration.

If high torque detents are required please see our Detent Control Mechanism (DCM) series datasheets.
As 聽previously highlighted, this family is indispensable wherever both cost and space saving reductions are important, or where a series of fixed positions along the potentiometer travel are required.


Tel: +34 948 820450 | Fax: +34 948 804050 | | www.piher-bet体育直播.com
PowerLug - Braided Cable

Powerlug is a power cable termination technology utilizing high pressure to mechanically deform copper wire strands and a copper sleeve to form a controlled width lug. Powerlugs can be used for single wire, multi-wire, splice, or braided cable power solutions. Powerlug technology is an excellent replacement for standard crimp lug applications especially where thermal/electrical performance, reliability, and cost are of primary concern.

Benefits

  • Superior mechanical and electrical performance relative to a crimp lug braided cable
  • Can use a variety of braided cable gauges and cross-sections
  • Can be used to replace a flexible busbar for applications with mechanical or thermal movement
  • Excellent technology for ground straps

Features

  • Various configuration options
  • Variety of termination options