Product Finder

Search for bet体育直播 products by bet体育直播 market or product application by filtering the dropdown below. Click on the product corresponding to your selection(s) to be redirected to the website of that business!

Reset
15mm Position Sensor/ Potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and 聽multi-purpose Control applications such as:

  • Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
  • Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
  • Timer & Function/Programme Select for Washing 聽Machines, Dishwashers and all White Goods in general.
  • Size and Position detectors.
Standard Features:
  • Conceived and designed for easy customisation.
  • SMD or Through-hole Mount.
  • Endless Rotation (360潞).
  • Wide Electrical Angle (340潞 +/-10潞).
  • Extended Mechanical Life (100k cycles).
  • Working Temperature Range: -40潞C to +120潞C.
  • Low Profile.
  • Linearity聽3%.聽
  • Embossed Tape or Bulk packaging.
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.

360潞 rotary position sensor.

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
  • Electrical angle: 360潞
  • Designed for direct input to microprocessor.
  • SMD, Horizontal or Through-hole Mount
  • Endless Rotation
  • Extended Mechanical Life
  • Working Temperature Range (-40潞C to +120潞C)
  • Low Profile (4.4 mm)
  • Linearity (independent): 卤2%
  • Embossed Tape or Bulk packaging
  • Reflow Soldering capability
  • Plug-in shafts
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • Ideal for Consumer Control and position sensing applications
  • IP54 protection according to IEC 60529

Customised value added position sensors.

One of our core competences has always been the high experience in manufacturing custom sensors and controls according to customers麓 requirements, coping with even the hasher environments麓 conditions using rotary, linear and multiturn contact and non-contact technologies.

The pursuit of the most cost-effective total custom-engineered Sensors Solution for your needs is firmly embedded in our business philosophy, whatever your requirements may be, from adapting standard products to complete new designs. Rapid prototyping, low batches accepted, up to 360潞 measuring range, analog, PWM, SPI, switch outputs are some of the key features offered by Piher. We offer accurate and reliable 360掳 non-contact angular position sensing.

DCM-PT15 detented potentiometer.

The combination of the well-known PT15/PTC15/PS15 control potentiometers with a Detent Control Mechanism (DCM) affords the appliance designer the possibility to solder the potentiometer onto the Control PCB assembly and then, in a second operation, assemble the DCM over it. This removes the need to build Detents into the User front panel of the appliance, simplifying, and significantly reducing the total cost of the solution.

The detent torque can be modified according to Customer requirements (depending on the input dial鈥檚 diameter, etc) as can the number and position of the detents.

Features
  • High & low torque detents can be freely mixed
  • Cut track option (initial / final)
  • Detents configurable to specific positions in complex tapers.
  • Designed for PT15V or PS15 (SMD)
  • Wiper positioned at 50% or fully clockwise
  • Resistive track dust proof enclosed
  • Up to 16 high torque detents
  • Also upon request:

聽 聽Self extinguishable plastic UL 94V-0
聽 聽Wiper positioned at 50% or fully clockwise
聽 聽Special Tapers
聽 聽Crimped terminals

Consumer electronics potentiometer.

Fully customiseable detented potentiometer that features:

  • detents (or no detents)
  • end stops
  • plastic / metal shafts
  • "plug-and-play" connectors
  • "push to turn" function
  • availability as switch, encoder or potentiometer
Main features

Endless Rotation (360潞)
Wide Electrical Angle (340潞 卤 10潞)
Extended Mechanical Life (25.000 cycles)
Laser trimming upon request
Resistance values*:聽 10k (potentiometer version)
Standard detents number*:聽 4, 2
Detent torque*:聽聽 900 to 1500 gf.cm
Tolerance:聽 卤 30%
Nominal Power: 0.15 W @ 50潞C
Linearity (absolute):聽聽 卤 5% (standard)
Taper: Linear (potentiometer version)
Life*:聽 25,000 cycles
Temperature Range:聽聽 聽聽聽 聽-40潞C to +120潞C
Mechanical Angle:聽 360潞
Electrical Angle:聽 280潞 卤 10潞
Rotational Torque:聽 鈮 50 mN.m
Max. Voltage:聽聽 聽聽聽 聽38 VDC

(*) Others upon request

NPA-201 Digital Output Absolute Pressure Sensor

The NovaSensor NPA-201 Digital Output Absolute Pressure Sensor provides low power consumption and compact size, making it ideal for battery-powered and mobile applications or any application where size is a constraint. In today鈥檚 growing market for portable electronics and wearables with multiple parameters being measured there are many applications that require an accurate measurement of barometric pressure to determine factors such as altitude.

Features:

  • 260 to 1260 mBar absolute pressure range
  • Temperature measurement included
  • Sleep State current <250nA (25掳C)
  • Temperature resolution: <0.003K/LSB
  • 16bit pressure and temperature resolution
  • Operation temperature: 鈥40掳C to +85 掳C
  • I2C interface
  • Operating range 1.7 ~ 3.6V
  • Small size package (2.0 x 2.5 x 1.0mm)
  • 8-HCLGA package
  • Fully Calibrated and Compensated
  • Digital compensation via 18bit internal digital signal processor (DSP) running a correction algorithm

By bet体育直播 Advanced Sensors | NovaSensor

15mm low profile incremental encoder.

The extended temperature range (-40潞C to +120潞C) allows this encoder to be employed in extreme environmental applications where other encoders currently on the market can not be used. This in combination with optional SMD or through-hole mounting makes the E-15 series ideal for automotive heating, ventilation & air conditioning, oven & microwave (white and brown goods in general), kitchen appliance and power tools.

Main features
  • 3 or 6 pulses per revolution (standard).
  • SMD or Through-hole Mount.
  • Working Temperature Range (-40潞C to +120潞C).
  • Low Profile (4.4 mm).
  • Embossed Tape (SMD) or Bulk packaging (Through hole).
  • Reflow Soldering capability.
  • Shaft insertable from both sides.
  • Polarised "T" rotor (European Home Appliance standard).
  • All PT/ PTC 15 shafts compatible.
  • IP54 protection according to IEC 60529.

FAKRA

The German and American automotive industries have standardized a high-performing, cost-effective RF connector based on the FAKRA and USCAR standards for automotive telematics. Utilizing a standard metal SMB connector embedded within a plastic housing that features multiple colored codes for easy identification, FAKRA connectors are designed to perform up to 6 GHz and meet the particular mechanical and environmental requirements of the automobile industry.

Flexible Printed Circuit Assemblies

bet体育直播 Sincere is a one stop shop for value added flexible circuits. 聽We will work with your engineering team from the inception of the design through full turn-key tested circuit assemblies. 聽Our services include design and聽gerber creation, DFM reviews, full in-house assembly, and testing of final product.

  • SMT and Manual Assembly
  • Wave Soldering
  • 聽Circuit Finishing including structural adhesives, epoxies, conformal coating, PSA adhesive, and Poron patches
  • Passive and Active Component Testing
Flexible and Rigid-Flex Printed Circuits

bet体育直播 Sincere provides high quality flexible printed circuit solutions for multiple markets including, but not limited to the 聽Industrial, Medical, Instrumentation, and Automotive markets聽. 聽By utilizing a聽manufacturing center of excellence in a low cost region, we offer the customer a great value at a low cost. 聽Our products include:

  • Single Sided Flex - Type I
  • Double Sided Flex - Type II
  • Multilayer Flex - Type III
  • Rigid-Flex - Type IV
HSD

HSD interconnect products focus on various application areas in the automobile, such as the inside compartment for connections to displays, head units and rear seat infotainment modules.

Media Hub

bet体育直播 Tecvox designs, manufactures and supplies a wide range聽of consumer interface devices for the automotive OEM market. These devices allow passengers in the car to interface their personal devices with the infotainment system via popular connections such as USB, SD, Aux Jack, HDMI and others.聽

The Media Hub provides a bridge for exchange of data, as well as charging consumer devices such as phones and tablets. They support global standards such as USB, Power Delivery and brand specific features such as Apple CarPlay and Android Auto.聽

Tecvox designs also involves Class A surfaces, port lighting and聽chrome finishes.

Hall Effect non contact sensor.

Designed with the sensor directly mounted onto a PCB, the innovative MTS-360 Sensor/PCB Combo package allows engineers to easily mount a fully featured rotary sensor without first having to design a printed circuit board for the sensor. The result is time-savings and convenience.

The MTS-360 Sensor/PCB assembly is available with or without 2.54 mm pitch connector, both easily secured with standard M3 screws.聽 The entire assembly measures just 35mm wide by 36mm long, allowing for applications with tight packaging constraints. 聽

The new MTS-360PCB Mechanical Mount sensor model incorporates all the breakthrough sensor technology performance features of the original MTS-360 by merging a through-shaft design with 360潞 absolute position feedback in a small size package.聽 The result is an extremely small fully featured rotary sensor with reliability up to 50 million cycles.聽聽 The MTS-360 relies on patented Hall effect technology to enable true non-contacting through-hole shaft sensing now using a simple three eared mounting. The standard model features a 4mm double D-flat through-hole and (3) slotted mounting holes allowing final rotational adjustment at assembly.

6mm carbon potentiometer.

6mm low cost carbon potentiometer. For long life and lead free reflow soldering please use the product .

Standard features:
  • RoHS compliant materials.
  • Carbon resistive element.
  • Plastic substrate.
  • Over-moulding manufacturing technique.
  • SMD or through hole.
  • Embossed Tape (for SMD), tape on reel, ammopack and magazine packaging for automatic insertion and bulk for manual assembly.
  • Both sides cross slot easy adjustment.
  • Accidental rotor movement protected.
  • Traceability insured through date code marking.
  • Assembly method: stand up and lay down.

Miniature potentiometer.

The N6R聽is a unique, fully RoHS ready miniture potentiometer with all the features of the traditional full size types. The combination of the 10k mechanical life, reduced form factor, RoHS reflow compatibility and overmoulding technology provides market leading performance in a compact, robust design.聽

The N6R Long Life "E" version has been conceived for the appliance and automotive industries to provide a cost effective solution. Further options include improved linearity, a 360潞 endless rotation option and a selection of shafts and knobs. Ask for double reflow potentiometers and geared potentiometers here.

16mm panel potentiometer.

16mm potentiometers enclosed in plastic housing with a shaft and聽IP54 ingress protection rating.

Main features

Modular gang type (up to 4).
Self extinguishable material UL 94-V0.
Bushless model.
Nut & washer.
Switch.
Stereo matching.
Metalic support.
IP54 protection according to IEC 60529.
Polyester substrate.
Carbon resistive element.

These provide full customisation capabilities, such as:

  • Electrical and mechanical specifications.
  • Custom mechanical life.
  • Special outputs (linear, log, anti-log, bespoke).
  • Absolute or independent linearity values.
  • Special resistance value and tolerance.
  • Mechanical and electrical angles.
  • Switch.
  • Selectable busing and shafts lenghts and shapes.

Potentiometers with detents

This product family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 6, 10 & 15 mm potentiometer series thus allowing a high range of configurations: special tapers, tolerances, linearity, cut track, etc.

This detent design not only adds a "click" sensation of position, but also offers enormous savings in both cost and space for any given application.

Strong and weak detents can be mixed as per cutomer麓s request.

- Replacement for:
聽聽 聽鈥 Existing customer detent mechanisms.
聽聽 聽鈥 聽Multi-pole switches.
聽聽 聽鈥 聽3 or 4-bit absolute encoders (connecting to microprocessor analogue input).
- Analogue signal presets.
- Temperature control settings.
- Relay Timers.

PT麓s with detents also lend themselves perfectly to industrial and domestic power tool applications where the detents prevent accidental movement of the potentiometer under vibration.

If high torque detents are required please see our Detent Control Mechanism (DCM) series datasheets.
As 聽previously highlighted, this family is indispensable wherever both cost and space saving reductions are important, or where a series of fixed positions along the potentiometer travel are required.


Tel: +34 948 820450 | Fax: +34 948 804050 | | www.piher-bet体育直播.com
Printed PCB variable resistors

Printed Resistors PCB are thick-film resistive ink elements designed around customers鈥 unique assemblies. PIHER鈥檚 thick film inks can be printed on a wide range of substrates 鈥 from high temperature ceramics to common PCB materials.聽

Our market-leading thick-film technology can be used to deposit any combination of fixed resistors, switches, sensors, potentiometer tracks and conductors onto virtually any size, shape or PCB form. This versatility offers an enormous range of design possibilities at聽
competitive prices,even in聽
low batch quantities.

Once screened and cured, these resistive tracks can be individually laser trimmed to obtain very accurate tolerances in high volume.聽

We also offer custom wiper (contact) assemblies as standard products or we can design and manufacture according to customers麓 bespoke design requirements.


This technology is ideal for three-wire voltage-divider (potentiometer) designs. Here, we offer in-process calibration and resistive (ohmic) process control, allowing for tight matching within lots and high precision voltage ratios between key points in the circuit.

More information download.

15mm SMD potentiometer / sensor.

This sensor offers a new surface mountable solution for detecting changes in angle and position and converting them into a highly reliable voltage output. The sensor can be processed by standard automated placement equipment and reflow (or lead-free reflow) soldered.聽For applications where rotor angle is critical, locating pins are available.聽

The PS15 Series is available with seven different rotor designs and 15 shaft styles. This offering allows Piher to configure a custom sensing solution for virtually any control or position feedback requirement.聽 The result is a customized sensor that maximizes board density, reduces weight and eases assembly while achieving the engineer鈥檚 critical sensor design goals for the application.聽

A wide range of options, including up to 38 detents, allows further customization.聽 Detents not only add a crisp "click" sensation for each position without affecting the original sensor specification or performance, but also offer significant savings in both cost and space; and are particularly advantageous in industrial and domestic power tool applications to prevent accidental movement.

6mm SMD potentiometer.

The PS-6 6mm SMD single-turn potentiometers feature configurable capabilities for design flexibility in a tiny package. They can be processed by standard automated placement equipment and聽lead-free reflow聽 soldered.

  • Is pin-to-pin compatable with our .
  • RoHS and REACH compliant.
  • Available in J-hook and gull-wing terminal configurations.
  • Tape and reel packaging.
  • Top cross-slot and hexagonal rotor adjustment.
  • Excellent soldering behavior even with aggressive profiles.
  • Low profile that allows customers to use it even in space-constraint applications.
  • Specifically designed for leadfree reflow soldering processes (excellent performance).
  • Dust proof enclosure. IP54 protection according to IEC 60529.
  • Stop positions (click sensation).
  • Self extinguishable plastic UL 94V-0.
  • Also upon request:

聽 聽 聽 - Long life model for low cost control potentiometer applications.

聽 聽 聽 - Wiper positioned at initial, 50% or fully clockwise.

The PS-6 Long Life version has been conceived for the appliance and automotive industries to provide a cost effective control potentiomteer solution.

SMD potentiometers from Piher.

The PS-10 & PSX-10 potentiometers arespecifically designed for leadfree reflow soldering聽processes (excellent performance).

Main features:

  • Self extinguishable plastic UL 94V-0 (PS-10).
  • Carbon resistive element.
  • Wiper positioned at initial, 50% or fully clockwise.
  • Specifically designed for leadfree reflow soldering聽
  • processes (excellent performance).
  • Full traceability.
  • Moisture sensitivity level 1 (PS-10).
  • Embossed tape according to IEC 60286-3:2007
  • IP54 protection according to IEC 60529.
  • Long life model for low cost control potentiometer applications.
  • Wiper positioned at 50% or fully clockwise.
  • Mechanical detents.
  • Low torque versions.

Magnetic non-contact sensor

The robust PSC-360 is聽 a low-cost high performance non-contacting rotary position sensor for automotive, off-road, medical and industrial applications whithout the limitations of potentiometric solutions (wear, limited electrical angles...) A configurable switch ouptput is integrated within the sensor too.

Full redundancy can be achieved by employing a dual core version or the simple placement of two sensors within the housing.

Sealed and flange mounted for easy positioning when necessary, it provides high stability聽 under harsh environment conditions such as vibration, shock, extreme temperatures / humidity, dither, moisture or dirt. Featuring a modular architecture, electrical & mechanical characteristics can be fully customised to customer麓s needs as well as connector configurations.

Magnetic non contacting position sensor

The robust PSC-360U is聽a panel mount, low-cost, high performance, non-contacting rotary position sensor for automotive, off-road, medical and industrial applications whithout the limitations of potentiometric solutions (wear, limited electrical angles...) A configurable switch ouptput is integrated within the sensor too.

Full redundancy can be achieved by employing a dual core version or the simple placement of two sensors within the housing.

Sealed and flange mounted for easy positioning when necessary, it provides high stability聽 under harsh environment conditions such as vibration, shock, extreme temperatures / humidity, dither, moisture or dirt. Featuring a modular architecture, electrical & mechanical characteristics can be fully customised to customer麓s needs as well as connector configurations.

Rotary switch potentiometer.

For more than 20 years PIHER has been manufacturing rotary 聽switches 聽for 聽all 聽types 聽of 聽applications. 聽Cost-effective and highly customiseable products with our huge experience in adapting them to customers麓 needs when necessary. We have the best solution for all your rotary switching needs. Our products are widely used in Automotive, Consumer and Multimedia applications due to their excellent performace and quality/price ratio.

ISO 聽TS1649, 聽ISO14001, 聽ISO 聽9001, 聽Lead-Free compliance and hundreds of satisfied customers are the best presentation card. Here we are presenting to you our Rotary Switches based on our PT series. We strongly recommend you to visit www.piher.net for our PC16, S15 and T-21 rotary switches and our full product range that includes Potentiometers, Encoders and Position
Sensors.

10mm carbon potentiometer

10mm carbon potentiometer

Main features

  • Plastic material according to UL94V-0 upon request
  • Dust proof enclosure聽聽 聽聽聽 聽聽聽 聽聽聽 聽聽聽 聽
  • Supplied in magazines for automatic insertion聽聽 聽聽聽 聽
  • Wiper positioned at initial, 50% or fully clockwise聽聽 聽
  • Low & extra low torque versions聽聽 聽聽聽 聽聽聽 聽聽聽 聽
  • Mechanical detents聽聽 聽
  • Special tapers聽聽 聽聽聽 聽
  • Special switch option upon request聽聽 聽
  • Cut track option upon request
  • Crimped terminals available

15mm potentiometer / sensor.

Our PT-15 single-turn carbon potentiomter series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"

Main features
  • Plastic material according to UL94V-0 聽聽 聽
  • Dust proof enclosure聽聽 聽聽聽 聽聽聽 聽聽聽 聽聽聽 聽
  • Life up to 200k cycles (click for longer life potentiometer models: up to 5 million cycles)
  • Supplied in magazines for automatic insertion聽聽 聽聽聽 聽
  • Wiper positioned at 50% or fully clockwise
  • Low torque versions
  • Mechanical detents (up to 27)聽聽 聽
  • Special tapers
  • Special switch option
  • Cut track option
  • Crimped terminals available
  • Special linearity

6 mm carbon potentiometer.

6 mm through-hole carbon potentiometer with a high level of customisation possibilities, such as:

  • Electrical and mechanical specifications.
  • Custom mechanical life.
  • Mechanical design.
  • Detents.
  • Special outputs (linear, log, anti-log, bespoke).
  • Absolute or independent linearity values.
  • Special resistance value and tolerance.
  • Mechanical and electrical angles.
  • Switches.
  • Custom shafts and knobs.
Main features
  • Carbon resistive element.
  • IP54 protection according to IEC 60529.聽
  • Polyester substrate.
  • SMD versions available (see the N6 product family).
  • Wiper positioned at initial, 50% or fully clockwise.
  • Supplied in magazines for automatic insertion.
  • Long life model (10K cycles), others upon request.
  • Housing available in self extinguishable plastic (UL94V0).
  • Mechanical detents (stops).

10mm cermet potentiometer

Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"

Main features:
  • Cermet resistive element.
  • Dust proof enclosure.
  • Alumina substrate.
  • Also upon request:
  • Low & extra low torque versions
  • Available as SPDT switch
  • Laser trimming for tighter tolerances
  • Wiper positioned at 50% or fully clockwise.
  • Supplied in magazines for automatic insertion.
  • Plastic material according to UL94V-0
  • Special tapers
  • Mechanical detents

15mm cermet potentiometer.

Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs".

Main features
  • Plastic material according to UL94V-0聽聽 聽聽聽 聽聽聽 聽
  • Dust proof enclosure
  • Long life model
  • Supplied in magazines for automatic insertion
  • Wiper positioned at initial, 50% or fully clockwise
  • Low torque versions
  • Mechanical detents (up to 27)
  • Special tapers
  • Special SPDT switch option
  • Cut track option upon request
  • Laser trimming for tighter tolerances聽聽 聽
  • Crimped terminals available聽聽 聽
  • Special linearity upon request

Rotary switch.

The N-15 potentiometer/sensor series has been expanded to incorporate both encoders and rotary switches in the same package configuration allowing the user to design in any one of the three options whilst keeping the same board layout and user interface.


The S-15 switch series has been specifically designed to offer a flexible and customiseable rotary switch/sensor solution for the automotive industry typically employed as multi-position interior/exterior lighting, Traction or Airbag enable/disable controls. The technology developed for the aforementioned S-15 solutions is also available for all types of custom switches however demanding your application may be.

Standard features:
  • 2 and 6 positions versions (standard)
  • SMD or Through-hole Mount
  • Low Profile (4.4 mm)
  • Embossed Tape (SMD) or Bulk packaging (Through hole)
  • Reflow Soldering capability
  • Shaft insertable from both sides
  • Polarised "T" rotor (European Home Appliance standard)
  • All PT/ PTC 15 shafts compatible
  • IP54 protection according to IEC 60529